Webasto Pure

  • Adjustable charging capacity from 3.7 kW to 22 kW, as well as 4.5 m permanently connected charging cable with charging coupler type 2 and integrated cable suspension
  • Up to ten times faster than using a standard domestic socket
  • Simple and convenient operation
  • Highest electrical safety thanks to own fuse protection

Available again from April 2019

In stock

The Webasto Pure impresses with these benefits:

  • Adjustable charging capacity from 3.7 kW to 22 kW, as well as 4.5 m permanently connected charging cable with charging coupler type 2 and integrated cable suspension
  • Up to ten times faster than using a standard domestic socket
  • Simple and convenient operation
  • Highest electrical safety thanks to own fuse protection
  • Affordable price and expert service
  • High quality "Made in Germany"

Electrical characteristics

Nominal current (A)
(configurable connected load values)
Adjustable between 16, 20 and 32
1- phase or 3-phase 
Line voltage (V) 230/400 AC (Europe)
Grid frequency (Hz) 50
Overvoltage category III in accordance with EN 60664
Safety standard According to IEC 61508
Protection class I
Residual current device (installation side) RCD IΔn = 30mA Typ A
DC fault current monitoring device (integrated)

6 mA RDC-MD
to protect the RCD on the installation side against fault DC currents

Connections

Cable feed on-wall or in-wall mounted
Connection cross section (wire dimension) The minimum cross-section for a standard installation is 6mm² (for 16A) and 10 mm² (for 32A), depending on the cable and type of installation.
Power supply terminal

Connection line:
- rigid (min.-max): 2.5 – 16 mm²
- flexible (min.-max): 2.5 – 16 mm²
- flexible (min.-max) with wire end ferrule 2.5 – 10 / 2.5 – 10 mm²

Cable Type2 charging cable: up to 32A / 400 VAC
in accordance with EN 62196-1 and EN 62196-2 length of 4.5 m
Cable bracket integrated
Output voltage (V) 230/400 AC
Max. charging capacity (kW) 3.7 to 22 (adjustable)

Function

Locking mechanism Key-operated switch for clearance to initiate charging
Display RGB LEDs
Buzzer
Operation Capacitive button

Mechanical Data

Dimensions (w x h x d) 225 x 437 x 85
Dimensions [incl assembly frame] (w x h x d) 225 x 437 x 107
Weight (Kg) 5,56
IP protection class device IP54
Protection against mechanical impact IK08

Ambient Conditions

Operating temperature range (°C) -25 to +55
(without direct solar radiation)
Temperature behavior The charging current is constantly provided within the operating temperature range. When temperatures are exceeded, the charging current is gradually reduced to 16 amperes, and shutdowns may also occur. Following a waiting phase, the charging process is independently re-initiated.
Storage temperature range (°C) -25 to +80
Permissible relative humidity (%) 5 to 95 non-condensing
Altitude (m) Max. 3,000 m above sea level