Webasto Live

  • Tailored to your requirements: Type 2 connector, up to 22 kW charging power, 4.5 m or 7 m cable length
  • Integrated DC residual current sensor and MID-compliant meter for a calibrated measurement
  • Custom-made digital services, among others, remote access via the Webasto Charging Portal, integration of the Webasto Charging app, live status, charging data reporting
  • Provision of billing data
  • Future-proof through online updates
  • Support of commercially available backend systems
  • Convenient thanks to Plug & Charge (ISO 15118)
  • Top security when using RFID through DESFire support
  • Integrated 4G modem for best reception at a future-proof standard
  • Local charge management for up to 250 charging points, control with no phase delay
  • Support for solar and rate-optimized charging through dynamic adjustment of the charging power

Available in Germany, Austria, the Netherlands and Belgium

The Webasto Live impresses with these benefits:

  • Tailored to your requirements: Type 2 connector, up to 22 kW charging power, 4.5 m or 7 m cable length
  • Integrated DC residual current sensor and MID-compliant meter for a calibrated measurement
  • Custom-made digital services, among others, remote access via the Webasto Charging Portal, integration of the Webasto Charging app, live status, charging data reporting
  • Provision of billing data
  • Future-proof through online updates
  • Support of commercially available backend systems
  • Convenient thanks to Plug & Charge (ISO 15118)
  • Top security when using RFID through DESFire support
  • Integrated 4G modem for best reception at a future-proof standard
  • Local charge management for up to 250 charging points, control with no phase delay
  • Support for solar and rate-optimized charging through dynamic adjustment of the charging power

Available in Germany, Austria, the Netherlands and Belgium


Electrical characteristics

Nominal current (A)
(configurable connected load values)
16 or 32
3-phase or single phase
Line voltage (V AC) 230/400 (Europe)
Grid frequency (Hz) 50
Grid forms TT/NT/IT
EMV class Emitted interference: Class B (residential, business, commercial areas)
Immunity: Industrial areas
Overvoltage category III in accordance with EN 60664
Safety standard III as per EN 60664
Protection class I
Protective devices Residual current circuit breaker and circuit breaker must be provided on the installation side
Integrated power meter MID-compliant, accuracy class B as per EN 50470-3 / class 1 as per IEC 62053-21

Connections

Mounting Wall and base mounting (permanently connected)
Cable feed Mounted on-wall or in-wall
Connection cross section (wire dimension) Cross-section of the connecting cable (Cu) taking into account the local conditions:
6 or 10 mm² for 16 A and 10 mm² for 32 A
Charging cable Type 2 charging cable: up to 32 A / 400 VAC as per EN 62196-1 and EN 62196-2
Length: 4.5 m / 7 m – Integrated cable bracket
Output voltage (V AC) 230/400 
Max. charging capacity (kW) 11 or 22 (depending on the variant)

Communication & features

Authentication – RFID reader MIFARE DESFire EV1 and MIFARE Classic (ISO 14443 A / B)
– “Plug & Charge” (ISO 15118)
Display 8 RGB LEDs
Buzzer
Network interfaces – LAN (RJ45) – 10 / 100 Base-TX
– WLAN 802.11b/g - 54 Mbit/s
Mobile communications Slot for SIM card (form factor 3FF / Micro-SIM), integrated 4G modem (LTE)
Other interfaces – Modbus (RS485) (for reading external power meters)
– USB 2.0 type A (for servicing only)
– USB 2.0 type B (for servicing only)
OCPP Version 1.6
Plug & Charge ISO 15118-1, ISO 15118-2
Local charge management Up to 250 charging points, dynamic, adjustment with no phase delay
Solar / rate-optimized charging planned

Mechanical Data

Dimensions (w x h x d) (mm) 225 x 447 x 116
Weight (kg) 4,4 - 6,8 (depending on the variant)
IP protection class, device IP54
Protection against mechanical impact IK08

Ambient Conditions

Operating temperature range (°C) -25 to +40
(without direct solar radiation)
Temperature behavior A reduction in charging current or shutdown may occur in oder to prevent the charging station overheating.
Storage temperature range (°C) -25 to +70
Permissible relative humidity (%) 5 to 95 non-condensing
Altitude (m) Max. 2,000 above sea level

Certification compatibility

Standards and guidelines – CE conformity
– 2014/53/EU Radio Equipment Directive
– 2011/65/EU RoHS Directive
– 2001/95/EG General Product Safety
– 2012/19/EU Waste Electrical and Electronic Equipment Directive
– 1907/2006 REACH Regulation
Tested OCPP backends Allego, has.to.be, Fortum, Bouygyes, Virta, ChargeCloud, Ladenetz, ChargeIT, NTT, Driivz, new motion, Vattenfall, Char.gy